Leje en Cynkomet T 149/1 14T

Wall height 800 mm thick, hot-dip galvanized – divided side walls

Extensions height 800 mm thick, hot-dip galvanized – divided side extensions

Central locking of walls (bottom sides)

External ladder and feet inside the cargo box hot-dip galvanized, with anti-slip steps facilitating access to the cargo box

Hot-dip galvanized cargo box service support

“Y” type drawbar with replaceable tip, homologated in accordance with UN ECE Regulation 55 (Reg. 55 UN ECE) and 167/2013*2015/208 ND

Bolted hitch rod fi 40

Hot-dip galvanized cargo box frame

Main stringers (with variable cross-section) of the cargo box frame made of bent steel sheets with increased strength, 6 mm thick. Profile cross-section at the highest point 110x300mm

Galvanized cargo box floor welded from two 5 mm thick sheets of sheet metal, screwed and riveted

Hot-dip galvanized lower frame (protection of the structure outside and inside the profiles), frame stringers made of closed profiles 250x150x8 and 150x150x8

Handbrake with crank

Grain chute, hot-dip galvanized with a lock in the rear wall

2 adjustable springs supporting the drawbar

Hot-dip galvanized lighting cover

Ropes connecting the sides

Pallet width

Tipping system secured with a shut-off valve against excessive tilting of the box

Lighting system connection cable with 7PIN 12V plug

12V lighting, homologated, rear bulb lights, side reflectors, front LED side lights

Hydraulic tipping system for the cargo box made of galvanized steel pipes and flexible hoses

Hydraulic connection to the tractor type ISO 7241-1 DN 12.5

Brake system: pneumatic, dual-line with output to the second trailer

Rear hydraulic, electric and brake output to the second trailer

Regenerated wheels 385/65-22.5

Axles from the renowned ADR company, full beam with a square cross-section of 90 mm, brake 400×80

Suspension on parabolic springs

Two wheel chocks placed in galvanized pockets

Telescopic cylinder with articulated suspension, five-stage with a stroke of 1980 mm. Nominal force on the fifth stage with a diameter of 140 mm, at a pressure of 20 MPa = 307.9 kN (31.4 T)

Wheel mudguards